A Cape Coral Dock and Lift Built for Today’s Boat and the Next One
This Cape Coral homeowner had a Yamaha 242 Limited S jet boat and plans to move up to a 28 foot Grady-White. He wanted a dock and lift that would handle both, and a shaded spot to sit on the water.
WB Williamson Bros. built an approximately 625 square foot WearDeck dock, installed a 13,000 lb IMM Platinum series lift, and set the pilings for a 10 foot by 15 foot tiki hut.
LOCATION
PROJECT TYPE
DOCK
Primary Challenge
The Client’s Situation
The homeowner wanted a functional dock with a shaded place to sit. His current boat is a Yamaha 242 Limited S. His next boat is planned to be a 28 foot Grady-White. Rather than buy a lift now and replace it later, he wanted one that would work for both.
What Made This Project Challenging
One Lift, Two Boats
A jet boat and a 28 foot Grady-White are very different boats. The owner wanted one lift for the boat in the water now and the one coming later.
Supporting a 10 x 15 Tiki Hut
The tiki hut needed its own support: four new 9 inch piles spaced for a 10 foot by 15 foot footprint.
A Clean Transition at the Seawall
The dock needed to meet the seawall cap evenly so the yard and dock feel like one level surface.
A Dock and Lift Planned Around Two Boats
We built the dock with 5/4” x 6” WearDeck reinforced polymeric decking in Barefoot Grey, set flush with the seawall cap on 2.5 CCA pilings. It has a single run poly rope safety rail and an aluminum retractable ladder.
The new 13,000 lb IMM Platinum series lift has an 11’6” cradle, factory standard aluminum bunks, stainless steel hardware, and maintenance free aluminum pulleys and bearing blocks, mounted on four new 10 inch lift piles.
A 10 x 15 Tiki Hut for Shade
We installed four new 9 inch piles spaced for a 10 foot by 15 foot tiki hut, giving the owner a large shaded seating area right next to the lift.
The Finished Result
The completed dock sits level with the seawall cap, with a 13,000 lb lift for the owner’s jet boat today and the Grady-White he plans to buy. The 10 by 15 foot tiki hut adds a shaded seating area beside the lift.
Browse more of our custom docks and boat lift installations, or see a similar project: Surfside Dock with Tiki & Paddle Craft Launch.
Materials and Specifications
- Approximately 625 sq. ft. dock, flush with the seawall cap
- 5/4” x 6” WearDeck reinforced polymeric decking, Barefoot Grey
- 2.5 CCA pilings
- 13,000 lb IMM Platinum series lift, 11’6” cradle, factory standard aluminum bunks
- Stainless steel hardware, maintenance free aluminum pulleys and bearing blocks
- Four new 10” lift piles
- Four new 9” piles for a 10’ x 15’ tiki hut
- Single run poly rope safety rail
- Aluminum retractable ladder
Sizing a Boat Lift for the Boat You’ll Own Next
When planning a boat lift, it is worth considering not only the boat you own now but also the one you may want next. Before you choose one:
- Plan for your next boat. Base the capacity on the heaviest boat you expect to own, fully loaded with fuel and gear.
- Check the cradle length. The bunks need to support the hull properly on both boats.
- Think about beam and hull shape. A jet boat and a center console sit on a lift very differently.
- Leave room around the slip. A larger future boat needs space to approach and clear the dock.
Let's Talk About Your Project
Since 1996, WB Williamson Bros. has built docks, boat lifts, and tiki huts for homes across Cape Coral and Southwest Florida. Whether you’re planning around the boat you have or the one you want, our team can help you design a dock that fits.
Call 239-283-2013 or fill out the form below to schedule a free consultation.










