A Cape Coral Dock With a Covered Boat Lift and Tiki Hut
This was the second time this homeowner hired WB Williamson Bros. to build a dock for one of his properties. For this Cape Coral canal home, he wanted a dock with a double rope rail, a lift ready for the boat he planned to buy, and a shaded place to sit by the water.
We built an approximately 760 square foot WearDeck dock, a 13,000 lb IMM Platinum series lift with a 28 foot canopy, and a 10 foot by 10 foot tiki hut.
LOCATION
PROJECT TYPE
DOCK
Primary Challenge
The Client’s Situation
The homeowner came to us with a clear list:
- A lift for his future 26 foot Sea Ray SDX
- A seating area out of the direct sun
- A double run safety rail for children and guests
- A decking color that would complement the paver hardscape between the house and the water
What Made This Project Challenging
Planning for a Boat Not Yet Purchased
The lift had to be sized and set up for a boat the owner did not have yet. The capacity and cradle needed to fit the 26 foot Sea Ray SDX he planned to buy.
A More Enclosed Railing Along the Dock
The homeowner wanted two rope runs along the open edges of the dock instead of the usual single run.
Matching the Hardscape
The dock runs off a paver walkway. The decking color had to tie into the pavers so the yard and dock read as one space.
WearDeck Construction and a Double-Run Rope Rail
We built the dock with 5/4” x 6” Owens Corning WearDeck reinforced polymeric decking in Barefoot Grey, chosen to complement the pavers leading down to the water. The dock is supported by 25 eight inch dock pilings.
Along the open edges, we ran a double run poly rope safety rail. Two rope lines leave less open space than a single run.
A Covered Lift Ready for the Next Boat
The new 13,000 lb IMM Platinum series lift has a 12’6” cradle, factory standard aluminum bunks, stainless steel hardware, and maintenance free aluminum pulleys and bearing blocks. It sits on four new 10 inch lift piles and includes a gem box, remote, and safety limit switch. A 28 foot Coastline boat canopy covers the lift to keep sun and rain off the boat.
A Tiki Hut for Shade on the Dock
To give the family a place to sit out of the sun, we installed a 10 foot by 10 foot tiki hut on the dock. Eight 10 inch pilings support the lift and tiki.
The Finished Result
The completed dock connects directly to the existing paver walkway, with Barefoot Grey decking, a double-run rope rail, a covered lift, and a shaded seating area under the tiki hut. The homeowner had worked with WB Williamson Bros. before and chose us again for this property.
Browse more of our custom docks and boat lift installations, or see our tiki huts.
Materials and Specifications
- Approximately 760 sq. ft. dock
- 5/4” x 6” Owens Corning WearDeck reinforced polymeric decking, Barefoot Grey
- 25 eight inch dock pilings
- Eight 10 inch lift and tiki pilings
- 13,000 lb IMM Platinum series lift, 12’6” cradle, factory standard aluminum bunks
- Stainless steel hardware, maintenance free aluminum pulleys and bearing blocks
- Gem box, remote, and safety limit switch
- 28 ft. Coastline boat canopy
- 10’ x 10’ tiki hut
- Double run poly rope safety rail
Design Considerations for a Family Dock
If your dock will see children, grandchildren, or a lot of visitors, a few choices are worth discussing early:
- Use a double run rail. Two rope lines leave less open space than one.
- Add shade. A tiki or covered area keeps people out of the midday sun.
- Plan the lift for your next boat. Sizing it now saves replacing it later.
Let's Talk About Your Project
Since 1996, WB Williamson Bros. has designed and built docks, boat lifts, and tiki huts for homes across Cape Coral and Southwest Florida. Our team can help you plan a dock, lift, and shade that fit the way your family uses the water.
Call 239-283-2013 or fill out the form below to schedule a free consultation.












